Call To Order
All our boards are custom built please call us at 760-809-9074 or use the custom board design form.
- These designs are much more maneuverable.
- Egg shaped boards custom made to any size.
- Available in any fin configuration.
7′ 0″ Length
18 – 1/4″ nose
23 – 1/2″ width
17 – 1/4″ tail
3 – 1/8″ thick
56.6 Volume
Much more maneuverable than a 3-fin thruster
This is the ultimate “mush Leaper”, the fins are moved 2 inches further up than industry standards; so this board turns like a 6’4″ board. The wider round pin makes it lightning fast and goes rail to rail quickly!
7′ 8″ Length
13 – 1/2″ nose
21 – 3/4″ width
14 – 3/4″ tail
3 – 1/4″ thick
60.6 Volume
7′ 6″ Length
16 – 1/4″ nose
22 – 1/2″ width
15″ tail
3 – 1/8″ thick
57.3 Volume
I have a great combination for Ya! Better flotation so you can catch waves easier. The fins are moved up further than other manufactures so the board turns like a 7.1″.
I can make this board any size necessary. They have more nose kick so they don’t pearl; and are hella fast to make sections easier. The round pin tail is 3 times better than a squash or swallow tail. This board rolls around into turns quicker, smoother, and hangs in better when going fast.
With the adjustable center fin this board work well in all types of surf.
7′ 6″ Length
13″ nose
22 – 3/4″ width
15 – 3/4″ tail
3 – 1/8″ thick
54.5 Volume
Wide in the middle.
Wide in the tail.
Pulled in nose.
Curvy outline.
Double barrel concave.
Concave in nose section.
This board is the ultimate small wave basher. It’s state of the art design covers 80% of surfing, from waist high to 2′ overhead. It can be blown up for the biggest XXL guy that rides a 10′ log and wants to ride a “shortboard”.
The 4 fin placement is crucial as the water flowing between the fins is like a fuel injector.
The advantage over a thruster is that a quad doesn’t have a fin stuck in the center of the tail, and it makes it turn quicker and goes faster.
With two fins on the rail, you have more holding power for bigger waves. With two unique wings it gives this quad a large range in wave size.
The bottom is a single to double concave with vee on the tail with low rocker. Joe Blair is a pioneer in quads. He has been shaping and refining this model for the last 25 years.
7′ 8″ Length
23″ Width
3 – 3/8″ Thick
16 – 1/2″ Nose @12″
15 – 1/2″ Tail @12″
65.5 Volume
Much more maneuverable than a 3-fin thruster
I have a great combination for Ya! Better flotation so you can catch waves easier. The fins are moved up further than other manufactures so the board turns like a 7.1″. You can create your own decals on your computer and send them to me and I can glass them on to the board.
I can make this board any size necessary. They have more nose kick so they don’t pearl; and are hella fast to make sections easier. The round pin tail is 3 times better than a squash or swallow tail. This board rolls around into turns quicker, smoother, and hangs in better when going fast.
7′ 7″ Length
24 – 1/2″ width
3 – 5/8″ thick
73.7 Volume
Available in XTR Epoxy
The custom made handle in this board makes carrying very easy.
I can make this board any size depending on weight, age or injuries. Example 9′-3” 27” wide 4 3/8” thick.
8′ – 7″ Length
17″ nose
24 – 1/4″ width
16 – 1/2″ tail
3 – 3/4″ thick
89.7 Volume
XTR Epoxy Model
Available in any fin configuration; single fin, 3-fin or quad fin
I built this Surfboard for everyone that has quit surfing and now only does stand up. This is a medical breakthrough in surfing! It is a round pin quad and if I have to make this board 9′ long and 26″ wide and 4″ thick to get you back surfing again, I’ll FRICKIN do it!
This board has a very fast bottom on it and it turns like an 8’2″ and paddles like a 9’6″ longboard.
The fins are moved up 4 inches further and are set in more than industry standards
Fin placement which is confidential is a major factor in high performance stand up paddle boards.